The 5A05 aluminum plate is an Al-Mg aluminum alloy, the strength is equivalent to that of 5A03, and it cannot be strengthened by heat treatment; the annealed state has high plasticity, and the plasticity is medium when it is semi-cold work hardened; Anodizing is required.
According to your request,each size can be selected for different application.Please contact us! | |
Product name | Aluminum Sheet/Plate |
Thickness | 0.1mm-500mm |
Width | 100mm-2650mm |
Length | As customer's requirements |
Temper | O, H, T |
Features | 1) High plasticity 2) Good corrosion resistance 3) Good weldability 4) High strength 5) Anti-fatigue strength |
Application | 1) fuel tank 2) Gasoline or lubricating oil conduit 3) Various liquid containers |
Surface | Flat every pieces covered with PE film |
Packing | Export standard wooden pallets (as per requirements) |
Remark | Specific requirement of alloy grade,temper or specification can be discussed at your request |
Chemical composition
Aluminum Al: Balance; Silicon Si: ≤0.50 Copper Cu: ≤0.10; Magnesium Mg: 4.8~5.5; Zinc Zn: ≤0.20; Manganese Mn: 0.30~0.6; Iron Fe: 0.000~0.500
Note: single: ≤0.05; total: ≤0.10
Mechanical properties
Tensile strength σb (MPa): ≥225; Conditional yield strength σ0.2 (MPa): ≥110; Elongation δ10 (%): ≥1
Note: Longitudinal mechanical properties of pipe at room temperature
5A05 Aluminum Sheet Supplier - HJMLSTEEL
HJMLSTEEL specializes in all kinds of stainless steel, aluminum, galvanized steel sheets, coils, pipes, bars, pipe fittings, high nickel alloy steel products, high temperature resistant products, etc.
Related Products
Automatic cutting machine cutting,no burr on the edge corrosion resistance,good mechanical properties,oxidation resistance and not easy to rust
Automatic cutting machine cutting,no burr on the edge corrosion resistance,good mechanical properties,oxidation resistance and not easy to rust
Automatic cutting machine cutting,no burr on the edge corrosion resistance,good mechanical properties,oxidation resistance and not easy to rust