1100 aluminum coil belongs to the aluminum series, its strength is relatively low, and it has excellent ductility, formability, weldability and corrosion resistance; after anodizing, the corrosion resistance can be further improved, and a beautiful surface can be obtained at the same time; but it cannot be strengthened by heat treatment.
Product | 1100 Aluminum Coil |
Thickness(mm) | 0.1-0.3mm |
Width(mm) | 100-2500mm |
Standard | GB, JIS, DIN, ASTM |
Surface treatment | Brushed, Mirror, Embossed, Sandblasted, etc |
Temper | O、H14、H18、H22、H24 |
Type | coil/sheet/strips/plate |
Package | Standard export package,such as wooden box or as required. |
1000 Series | Industrial Pure Aluminum(1050,1060 ,1070, 1100) |
2000 Series | Aluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17) |
3000 Series | Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105) |
4000 Series | Al-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A) |
5000 Series | Al-Mg alloys(5052, 5083, 5754, 5005, 5086,5182) |
6000 Series | Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02) |
7000 Series | Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05) |
Chemical composition
Aluminum Al: 99.00 Silicon Si: 0.45 Copper Cu: 0.05 ~ 0.20 Magnesium Mg: -- Zinc Zn: 0.01 Manganese Mn: 0.035 Titanium Ti: -- Vanadium V: 0.05 Iron Fe: 0.35 Note: Single: 0.05.
Automatic cutting machine cutting,no burr on the edge corrosion resistance,good mechanical properties,oxidation resistance and not easy to rust
Automatic cutting machine cutting,no burr on the edge corrosion resistance,good mechanical properties,oxidation resistance and not easy to rust
Automatic cutting machine cutting,no burr on the edge corrosion resistance,good mechanical properties,oxidation resistance and not easy to rust